OpenCV中文网站

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
热搜: 安装 配置
查看: 1403|回复: 1

opencv3.0.0交叉编译

[复制链接]
发表于 2017-2-9 15:29:51 | 显示全部楼层 |阅读模式
  1. opencv3.0.0移植到arm板
  2. 执行make时,弹出下面错误,感觉是缺少东西导致,但是不知道缺少什么。。。。。

  3. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lgtk-x11-2.0
  4. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lgdk-x11-2.0
  5. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -latk-1.0
  6. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lgio-2.0
  7. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lpangoft2-1.0
  8. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lpangocairo-1.0
  9. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lgdk_pixbuf-2.0
  10. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lcairo
  11. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lpango-1.0
  12. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lfreetype
  13. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lfontconfig
  14. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lgobject-2.0
  15. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lglib-2.0
  16. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lgthread-2.0
  17. /usr/lib/gcc/arm-linux-gnueabihf/4.6/../../../../arm-linux-gnueabihf/bin/ld: cannot find -lglib-2.0

  18. 还望大家给个建议!
  19. 谢谢大家!
复制代码


回复

使用道具 举报

发表于 2017-3-2 16:27:37 | 显示全部楼层
你好  可以 交流交流么  我也在做opencv交叉编译 qq:1158092568
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

手机版|OpenCV中文网站  

GMT+8, 2019-10-23 20:55 , Processed in 0.044494 second(s), 17 queries .

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表